Garage Gadgets Inc. - The lift experts with quality automotive equipment from under-hoist oil drain, transmission jacks, motorcycle tire changers, and garage storage ideas.

Two Post 11,000 lb. Capacity Car Lift Two Post 15,000 lb. Capacity Car Lift Two Post 12,000 lb. Capacity Car Lift Two Post 9,000 lb. Clear Floor Car Lift Two Post 9,000 lb. Low Ceiling Car Lift

Four Post 7,000 lb. Capacity Car Lift Four Post Xtended 7,000 lb. Capacity Car Lift Four Post 9,000 lb. Capacity Car Lift

Four Post 12,000 lb. Capacity Truck Lift

Motorcyle Lift w/Vise & Rear Dropout Motorcyle Lift w/Front Extension, Vise & Rear Dropout Motorcyle Lift w/Side Extension, Vise & Rear Dropout Motorcyle Lift Accessories

Low Rise Pad Scissor Lift 6,000 lb. Capacity Mid-Rise Scissor Lift 6,000 lb. Capacity

2 Post Car Lifts 4 Post Auto Lifts Sliding & Rolling Jacks Lightweight Aluminum Ramps Scissor Lifts Motorcycle Lifts and Accessories

Used Balancers Used Tire Changers Used Brake Lathes Used Air Compressors Used 2 Post Lifts Used 4 Post Lifts Used Computer Alignment Machines Used Pipe Benders Used Misc. Equipment

Carpet Tiles Used Equipment

Car Care Coolers A/C Refrigerant Management System

OBD Scanner Tools Timing Lights Amp Clamps Multimeters

Bottle Jacks Jack Stands Shop Vacs Generators Parts/Brake Washers Air Compressors Creepers, Creeper Seats & Stools Car Dollys & Hand Truck Vises

Shop Tools, Equipment & Supplies

Welcome to Garage Gadgets, Inc., we can assist you with ideas for finishing the inside of a garage, or provide you with automtotive equipment such as under-hoist oil drains, transmission jacks, motorcycle tire changers, shop press, or hose reels. Shopping online for garage storage ideas, atv garage storage lifts, or auto lifts is made easy compared to the competition. Everyone that visits our website is looking for the best deal and Garage Gadgets, Inc. has the BEST DEAL for you. If you have any questions about our products, please contact us at 866-602-0888.

4 Ton Capacity Bottle Jack

Model: MTN5604

$21.77

Features and Benefits:

Lift capacity: 8,000 lbs.; ASME certified
Minimum height: 7.75”; maximum height: 15.25”; hydraulic lift: 7.5”, additional screw adjustment: 2.75"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 3.6" x 4"

Shipping weight: 7.5 lbs.

Back to Top

6 Ton Capacity Bottle Jack

Model: MTN5606

$26.19

Features and Benefits:

Lift capacity: 12,000 lbs.; ASME certified
Minimum height: 8.3”; maximum height: 16.75”; hydraulic lift: 8.45”, additional screw adjustment: 3.1"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 3.8" x 4.5"

Shipping weight: 10.2 lbs.

Back to Top

8 Ton Capacity Bottle Jack

Model: MTN5608

$35.37

Features and Benefits:

Lift capacity: 16,000 lbs.; ASME certified
Minimum height: 9”; maximum height: 18”; hydraulic lift: 9”, additional screw adjustment: 3.5"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 4" x 4.6"

Shipping weight: 12.7 lbs.

Back to Top

12 Ton Capacity Bottle Jack

Model: MTN5612

$47.06

Features and Benefits:

Lift capacity: 24,000 lbs.; ASME certified
Minimum height: 9.1”; maximum height: 18.5”; hydraulic lift: 9.4”, additional screw adjustment: 3.5"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 4.5" x 5.25"

Shipping weight: 16.4 lbs.

Back to Top

12 Ton Capacity Short Bottle Jack

Model: MTN5613

$46.16

Features and Benefits:

Lift capacity: 24,000 lbs.; ASME certified
Minimum height: 6”; maximum height: 10.5”; hydraulic lift: 4.5”, additional screw adjustment: 1.75"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 5.15" x 5.5"

Shipping weight: 13.9 lbs.

Back to Top

20 Ton Capacity Bottle Jack

Model: MTN5622

$72.96

Features and Benefits:

Lift capacity: 40,000 lbs.; ASME certified
Minimum height: 9.3”; maximum height: 15.5”; hydraulic lift: 6.2”, additional screw adjustment: 3"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 5.75" x 6"

Shipping weight: 24.6 lbs.

Back to Top

20 Ton Capacity Short Bottle Jack

Model: MTN5623

$73.24

Features and Benefits:

Lift capacity: 40,000 lbs.; ASME certified
Minimum height: 6.5”; maximum height: 11.3”; hydraulic lift: 4.8”, additional screw adjustment: 2"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 6.1" x 6.25"

Shipping weight: 20.6 lbs.

Back to Top

Pair 3 Ton Ratcheting Jack Stands

Model: MTN5103

$48.02

Features and Benefits:

Lift capacity: 6,000 lbs.
Minimum height: 11.25”; maximum height: 17”; total lift: 5.75”
Base size: 7.5" x 7"

Shipping weight: 16 lbs.

Back to Top

Pair 6 Ton Ratcheting Jack Stands

Model: MTN5106

$64.07

Features and Benefits:

Lift capacity: 12,000 lbs.
Minimum height: 15.5”; maximum height: 24”; total lift: 8.5”
Base size: 9.75" x 11"

Shipping weight: 38.5 lbs.

Back to Top

Heavy Duty Portable 5 Gallon Wet/Dry ShopVac

Model: SHV5872462

$119.99

Features and Benefits:

This 5 Gallon portable vac is easy to carry, compact with a top carry handle for easy lifting
With a 3.5 HP motor, the BullDog® is powerful, easily removes soil, crumbs and pet hair from carpets and upholstery
Features a 7' Lock On® Hose System
18' cord and heavy duty cartridge filter
Includes 1-1/2" diameter x 7' lock-on hose, claw utility nozzle, crevice tool, tool holder and adapter and disposable bag

Designed for the professional. It is compact and portable with a top carry handle. 7’ X 1-1/2” Lock on hose. Cord Wrap and Accessory Storage. Accessories include claw utility nozzle, crevice tool, cartridge filter, and disposable filter bag.

Back to Top

BullDog® 6 Gallon ShopVac

Model: SHV5870800

$99.99

Features and Benefits:

Perfect for cleaning cars, vans, trucks and RV's
With a 4.5 HP motor, the BullDog® is powerful, easily removes soil, crumbs and pet hair from carpets and upholstery
With a 12' hose the BullDog® is adaptable, making it ideal for cars, computers, stereos, TV's, VCRs, etc.
18' cord and heavy duty cartridge filter
Includes 1-1/4" diameter x 12' lock-on hose, (2) 1-1/4" extension wands, 10" wet/dry nozzle, round brush, crevice tool and gulper nozzle

Shop-Vac® designed this vac with the auto enthusiast in mind, equipping it with an extra long 12' hose and car cleaning accessories to make vehicle detailing a snap. This quiet operating vac can also be used for any other heavy duty cleaning tasks around the home wet or dry. It's powerful 4.5 HP Motor, 18' Power Cord, Heavy Duty Cartridge Filter, and On-board Accessory Storage make it a very versatile vacuum cleaner.

Back to Top

1200 Watt Generator with 2.4 HP Engine

Model: PPLG150

$299.99

Features and Benefits:

Power Plus generator delivers 1200 Watts of maximum power and 1000 Watts of continuous power
2.4 horse power overhead valve gasoline engine
Solid frame that includes a wheel kit as well as a handle kit for ease of movement
Power Plus generator unit includes one 120 volt GFI outlet
Fuel capacity: 1.5 gallons with run time of 8 hours on a full tank

The Power Plus 1200 watt generator supplies 120 volt power through a single outlet. The Power Plus includes: spark plug wrench, spark plug, 12 V DC power cord and instruction manual.

Back to Top

8500 Watt Generator with 13.5 HP Engine

Model: PPLG850

$899.99

Features and Benefits:

Power Plus generator delivers 8500 Watts of maximum power and 7000 watts continuous power
13.5 horse power overhead valve gasoline engine includes an electric starter
Solid frame that includes a wheel kit as well as a handle kit for ease of movement
Generator supplies both 120 volt (2 outlets) and 240 volt (1 outlet) single phase power
Fuel capacity: 6.5 gallons with run time of 11 hours on a full tank

Includes a spark plug wrench, spark plug and instruction manual.

Gasoline engine is EPA and CARB approved.

Back to Top

30 Gal Heavy Duty Parts Washer with Drum

Model: KLN1230D

$486.99

Features and Benefits:

Flexible spigot
Heavy-duty steel construction
UL-CSA approved heavy-duty electric pump 110 volt 60 HZ
Spring loaded lid closure with "Fire Link"
Electrostatic paint for strong, reliable finish
Sink drain - catches heavy debris before entering solvent
CSA and NRTL C approved
Length: 32"
Width: 20"
Tank depth: 8"
Drum capacity: 30 gallons
Operating gal: 17 gallons

Back to Top

Standard Sink Parts Washer - SmartWasher®

Model: CFCW-925

$1,762.97

Features and Benefits:

Built-in heater keeps fluid at a comfortable 105°F
Manual off/on flow control with toggle switch
Toggle switch controls, 10 minute timer and an adjustable thermostat
Disposable, microbe mat, traps particulate matter down to 50 microns in size
SW25 Series SmartWasher parts washer with standard sink

SmartWashers uses bioremediation technology to produce parts washing systems that are both cost-effective and environmentally safe. SmartWashers combine powerful, aqueous-based cleaning solution (OzzyJuice) with non-pathogenic "Ozzy" microbes which eat away at even the toughest contaminants, leaving no hazardous by-products. Using a powerful cleaning agent to clean the toughest grease and grime, head-to-head competition has proven that the SmartWasher can clean as well as and as quickly as solvents, without the dangers of solvent or the expense and hassle of hauling! This includes 25 gallons of SW-3 OzzyJuice® and 1 FL-3 OzzyMat®. Simply change your OzzyMat® a minimum of every 30 days and top off as needed.

Back to Top

Single Stage Electric Powered 3 HP Air Compressor

Model: IRTCSS3L3

$802.99

Features and Benefits:

60 gallon vertical tank
Maximum operating pressure is 135 PSI
230/1/60, nominal amp draw motor: 6.5 electric ASME receiver size: 60
11.3 CFM at 90 PSI
10.3 CFM at 135 PSI

Our Single-Stage electric air compressors are ideal for most anyone from the do-it-yourselfer, to the professional air compressor user. Each compressor features durable cast-iron construction, 100 percent continuous duty cycle for the toughest applications and extended pump life for years of trouble-free service.

Back to Top

2545E10VFP Type 30 Fully Packaged (230/460/3 V) 10 HP Air Compressor

Model: IRTC2545E10VFP

$3,599.00

Features and Benefits:

Ingersoll-Rand Industrial Quality and Performance in an Automotive Air Compressor
All cast iron pump ensures long operating life exceeding 10,000 hours of operation
Integrated intercooler provides drier air for longer lasting tools and air operated equipment
Oversized flywheel and balanced pistons provide minimal vibration when running
Moisture in automatically drained by the included electronic drain valve

120 gallon horizontal tank. Ingersoll-Rand, the world leader in air power, brings industrial-class, two-stage compressors to automotive applications. Featuring an all-cast-iron pump, with splash lubrication for efficient operation and easy serviceability, this new range delivers non-stop performance and reliability for commercial or automotive service applications. Type 30 compressors have been designed to generate maximum air output at 175 psi, with more than 10,000 hours durability. In addition to the features included on our standard package, the fully packaged models include: air cooled aftercoolers to help remove additional moisture and an electronic drain valve that automatically drains water from the compressor tank - all at a much greater value than purchasing and installing them separately. 100% cast-iron cylinder head with deep groove directional cooling fins - high-efficiency inlet air filter with sound attenuation baffles. High-efficiency stainless steel valves balanced pistons for maximized efficiency and minimized vibration. Oversized industrial-grade bearings for extended pump life. High efficiency intercooler - oversized cast-iron balanced belt wheel to allow continuous-duty operation.

Back to Top

5 HP 20 Gallon 115 Volt Single Phase Portable Compressor

Model: IMC5020P

$787.91

Features and Benefits:

8.31 ACFM @ 40 PSI; 7.1 ACFM @ 100 PSI; 130 PSI maximum pressure
115 volt operation
20 gallon ASME tank
Smooth and quiet running
Cast iron cylinder and stainless steel valves

This compressor is a 115 volt 7.1 ACFM compressor on a 20 gallon ASME portable tank. It is shipped full of oil--ready to be used and comes with a regulator and 1/4" outlet. Dimensions: 34-1/2"L x 19-1/4"D x 31-1/2"H. Shipping weight: 165 lbs.

Back to Top

Pancake Style Electric Air Compressor

Model: EASEA15

$139.99

Features and Benefits:

State of the art cast aluminum pump
Oil lubricated, direct drive motor/pump for efficient operation and long life
Provides 4.5 SCFM @ 100psi
One full year warranty
Substantial service program in the US

This air compressor also features an air pressure switch with an On/Off dial, an air pressure regulator, a 115 volt UL approved safety plug and cord. Runs on a 2.5 horsepower, 13.5 Amp electric motor. Pump RPM is 3400, maximum PSI is 115. Dimensions: 16.5" x 16.5" x 22.8" and weighs 55 lbs.

Back to Top

Single Stage Electric Reciprocating Air Compressor 5HP

Model: IMC5026VP

$771.99

Features and Benefits:

5 horsepower
115/230-1 motor volt/phase
11.90 cfm displacement
ACFM @ 40 PSI 8.31
ACFM @ 100 PSI 7.10
Max. PSI 130

Back to Top

40" Chrome Frame Creeper with 6 Casters

Model: MTN3400

$60.28

Features and Benefits:

Frame dimensions: 40 in. x 17 in. x 4 in.
Caster size: 2-1/2 in.
Cushioned red vinyl cover with headrest

Back to Top

36" Creeper with 4 Casters

Model: MTN3404

$44.42

Features and Benefits:

Powder coated black frame
Frame dimensions: 36 in. x 17 in. x 3-1/2 in.
Caster size: 2-1/2 in.
Cushioned red vinyl cover

Back to Top

6 Caster Creeper with Adjustable Head Rest

Model: MTN3405

$63.79

Features and Benefits:

Dimensions: 40 in. x 17 in. x 3-1/2 in.
Powder coated black finish/frame
Caster size: 2-1/2 in.
Cushioned red vinyl cover

Back to Top

Plastic 6 Wheel Creeper

Model: MTN3411

$71.30

Features and Benefits:

40 in. ergonomically designed frame
(6) 3 in. swivel casters make it extremely manueverable
Vinyl covered foam head rest for maximum comfort
Two small storage trays conveniently located on either side
A low profile of 1 in. allows for greater clearance under vehicles

Back to Top

Creeper Seat

Model: MTN3407

$45.27

Features and Benefits:

Powder coated black frame
Frame dimensions: 17 in. D x 14 in. L x 14 in. H
Caster size: 2-1/2 in.
Cushioned red vinyl seat cover
Includes convenient parts storage tray

Back to Top

Professional Pneumatic Shop Seat

Model: MTN3409

$48.04

Features and Benefits:

Powder coat black finish
Caster size: 2-1/2 in.
Cushioned red vinyl seat cover
Includes convenient parts storage tray

Back to Top

Tractor Seat Creeper Seat

Model: MTN3414

$94.89

Features and Benefits:

Molded High Back Tractor seat for more comfort and larger seating area
Five 3-1/2" Chrome painted Mag Wheel Casters - professional look
Hydraulic cylinder for easy height adjustment - comfort and better work height
Storage Tray below the seat - for small fasteners and extra tools
Weight capacity: 250 lbs.

Molded Tractor Seat for more comfort and a wider seating area with an air cylinder for easy height adjustment and five 3-1/2 in. heavy duty, chrome painted casters with rubber tread for ease of mobility. Large 17" diameter, 1" deep tool tray for extra storage.

Back to Top

Over Engine Creeper Topsider

Model: REL6600

$282.00

Features and Benefits:

Adjustable height: 48 in. to 70 in.
Pad: 18 in. long
400 lb. capacity
Heavy duty casters
Great for getting to the engine from the top of the vehicle vs. the bottom
Deck is padded and covered with heavy duty vinyl for comfort

Back to Top

Chrome Stool

Model: CLKMT1000

$59.81

Features and Benefits:

Heavy duty steel construction with chrome plated finish
Double ring design for superior strength and stability
Vinyl padded swivel seat - rotates 360 degrees
Weight capacity: 350+ lbs.
Dimensions: 30" Tall X 19" Wide

Stylish, heavy duty chrome stool with ball bearing swivel seat.

Back to Top

Counter Bar Stool

Model: WHICNTRBS

$37.19

Features and Benefits:

25" high bar stool
Four sturdy, chrome-plated legs for support
Ring at bottom of legs for foot rest
Rubber, non-skid feet for stability
Durable padded red cushion provides comfort and durability.

25" high padded counter bar stool is the perfect height for most work benches. Four sturdy, chrome-plated legs for ultimate support; ring at bottom of legs for foot rest. Rubber non-skid feet for stability while working.

Back to Top

1,500 lb. Easy Roller™ Dolly

Model: OTC1580

$159.13

Features and Benefits:

Four heavy-duty phenolic casters
1,500 lb. capacity per unit
Hydraulic lift mechanism with locking pin
Fits tread widths up to 12"
Sold individually not as a pair

Easy Roller provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Just position an Easy Roller at each wheel of a vehicle weighing up to 6,000 lbs., and use the foot pedals to activate the hydraulic lift mechanisms. Within minutes, one individual can easily move the car throughout the garage. The Easy Roller fits tread widths up to 12", and the four heavy-duty casters can support up to 1,500 lbs. per unit while, at the same time, protecting the shop floor from damage. Four required per vehicle.

Back to Top

5in. Mechanic's Vise

Model: WIL745

$214.99

Features and Benefits:

30,000 PSI
Weight: 50 lbs.
1/4" to 2-1/2" Pipe Capacity

Back to Top

6in. Mechanic's Vise

Model: WIL746

$277.69

Features and Benefits:

Heavy duty 30,000 PSI castings for long life and added strength
Replaceable hardened steel serrated jaw inserts and replaceable pipe jaws provide sure grip
Large anvil
Enclosed, unbreakable box frame, steel channel
Swivel base rotates 360 degrees
Jaw opening: 5-3/4 in.
Throat depth: 4-1/8 in.
Pipe jaw capacity: 1/4 in to 3-1/2 in.
Weight: 64 lbs.

Back to Top